US
& Canada
1-800-441-6173
Worldwide
1-908-862-6200
Keep Cutting Edges As Sharp As When They Were Honed... up to 20X Longer!
Provides superior properties when compared to other PVD, vacuum deposition, titanium nitride (TiN) coatings.
Ultra-hard, micro-thin GOLDENEDGE® surface enhancement for blades keeps your equipment on the cutting edge of efficiency.
Exclusive benefits of GOLDENEDGE® surface enhancement for cutting edges:
Increases surface hardness up to an equivalent of Rc85
Resists corrosive attack by acids and alkalis
Meets USDA, FDA and CFIA codes for food and drug contact
Non-stick surface cleans up easily, with just water
No restrictions on shapes of cutting surfaces
Permanent mechanical interlocking with substrate
Uniform thickness ± 0.000015"
Perfect TiN phase structure for blades
Reduce frequency of changing blades
Increase equipment cutting speeds
A superior alternative to other PVD, vacuum deposition, titanium nitride (TiN) coatings
GOLDENEDGE
Ultra-hard, micro-thin coating for sharp edged devices such as blades, knives, slicers . USDA/FDA/CFIA-compliant.
Goldenedge
Wear
Corrosion
Lubricity
Anti-Stick
Temperature
FDA/USDA
YES
Ratings are meant for reference only. For specific application recommendations contact the General Magnaplate technical staff.
1 1.5 2 2.5 3 3.5 4 4.5 5
Magnaplate-applied GOLDENEDGE coating on the cutting edges of blades, knives, slicers and other sharp-edged devices resists wear and abrasion while dramatically lengthening service life - by as much as 20 times!
When GOLDENEDGE is applied to cutting edges, its thickness is controlled to within micro-inches, preventing dulling even on angles of 7° - 9°. Because it's processed at low temperatures, this micro-thin, enhanced TiN PVD coating has a very fine grain structure. This results in an extremely low coefficient of friction, as well as a dense, ultra-hard surface that minimizes wear of the edge point.
Increase blade life and improve operational speed on these kinds of equipment:
1.5
2.5
3.5
4